Testing Exhaust Systems on my CRX [ Archive] - GasSavers.org - Helping You Save at the Pump
View Full Version : Testing Exhaust Systems on my CRX
SVOboy
04-11-2006, 09:27 PM
Well, I've got two exhaust manifolds already, stock and Civic CX/VX/STD/HF.
Jared will gimme his stock D16Z6 header to test, so that's three.
Anyone got any laying around they want tested, or any suggestions in particular for me to do while testing?
I don't mind doing stuff like modifying the one that isn't as good a bit to see if I can improve it, just don't wanna **** up the good one.
:)
Matt Timion
04-11-2006, 10:46 PM
I'm glad you're going to do this. I might have time to do this myself, but I can't be sure.
If anything we can use it to test the location of hte o2 sensor on fuel economy.
waiting for the supermid might be best though so you can just do a few runs and we can compare the numbers.
molecule
04-11-2006, 11:38 PM
open header should be tested
bahahaha !!!
ok how bout...after the cat...???
SVOboy
04-12-2006, 05:14 PM
Right now I'm just going to be doing headers since I have a few and can borrow a few for free/cheap.
guvmint_cheese
04-14-2006, 09:16 AM
Don't you need a different cat for the HF/VX manifold? I thought they're placed in the engine bay compared to under the car for the standard header setup.
Jeff
Matt Timion
04-14-2006, 09:25 AM
Don't you need a different cat for the HF/VX manifold? I thought they're placed in the engine bay compared to under the car for the standard header setup.
Jeff
You're right. On the HF/VX/HX/STD the cat is directly under the exhaust manifold. On the DX/LX/EX/SI the cat is closer to under the engine. HOPEFULLY the cat+downpipe from the VX/HF will bolt right up to where the old cat/downpipe use to be. If it doesn't custom piping will be required.
SVOboy
04-14-2006, 10:12 AM
Yep, i have the cat and downpipe for that so there's no issue there, :)
zpiloto
08-06-2006, 07:53 AM
Bump. To go with the current exhaust discussion.:p
SVOboy
08-06-2006, 02:57 PM
Well, my testing of this swap was plagued by alternator failure so I said screw it, have had the vx exhaust on for a bit and it seems to warm up more quickly/get higher cruising numbers, but that's just bs, no serious testing has taken place. Will be putting the cx head on this week so Iono if I'll be testing anything unless someone finds me something to.